Last updated: 02/24/2010

KRIEGER BARRELS ARE NO LONGER AVAILABLE FOR PURCHASE IN ANY CONTOUR OTHER THAN SERVICE RIFLE, VARMINT, OR SPACE GUN.  SLIGHT VARIATIONS OF THESE THREE CONTOURS ARE ACCEPTED.  CALL FOR MORE INFO!

We only work in the flowing calibers:

.223

6.8 SPC

.204 Ruger

.17 Remington

.22 RF for use with a modified dedicated M-261

This is all.  We do not work in any other calibers.  We do not work on bolt guns.

This is what it looks like when you vent 80,000+ PSI through what's left of your cartridge case head into your AR-15.  CLICK

A very Strong and Deep 'Thank You!' to all of our nations heroes.  Please click here

 

The newest crew member:  Sylar Zane Baudoin - Grandson to Frank and Theresa White.  Born May 27th, 2008.

Sylar is very happy to announce that he is patiently awaiting the arrival of his new Little Brother in March.

Melissa Acebo: Master Class

 

Her Daddy doesn't have to worry when she goes out!

 

Ray-Vin Super Smoker!  http://www.ray-vin.com/frcle.htm  Please click this link to read about and order your Super Smoker.  You will never see anything else as good as this.

 

Coral Rose White, 7:  Frank's First Grandchild.  Daughter of Conrad and Crystal White.

Attention:  Please do not send any accessories with your rifles.  We are not responsible for lost magazines, slings, muzzle/sight protectors, or accuwedges.  We have to remove all of these accessories to do work on your rifles and it is just about impossible to ensure 100% of the time they will be returned with the correct project.  We are human too and we make mistakes.  Please do your part to eliminate them.

Notice:  Any contour other than our standard contours will be $50.00 additional.  

Standard Service Rifle contour is 1" under handguards, .750" at the front base and .740" to the muzzle, 20" long.  There is no additional charge for threading the muzzle.

Standard 'Space Gun' contour is 1" under handguard, .850" at the gastap, .840" to the front base, and .750" or .812" at the muzzle.    

Standard Varmint contour is 1" under handguard, .850" at the gastap, and .840" to the muzzle.  

Space gun and Varmint contours are 20"-26" long without additional charge.  For longer barrels, call for pricing.

If you need a short barrel, under 20", call for pricing.

SPR - 17.9" OAL, .850" under the handguard, .750" at the front sight base, standard steps for Ops Inc collar.  Rifle Length gas system.  (Available in MID gas in Douglas Only.)

(This is only applicable for quantities under 5.)

.22 upper notice:  If you have a .22 upper from us, please refer to page C-4 in your maintenance manual, part number 14.  This screw has a tendency to vibrate loose from the recoil.  If you are having this problem you may end up with a broken spring, part 16.  To prevent this we recommend that you put a bit  loctite on the screw and screw it down tight.  If you don't have any loctite, some nail polish will work almost as good.

Please see the .22 page and the Barrel page for information on supplying a barrel blank for your project.

Please remember to include your contact information with packages.  This makes it a lot easier for us to expedite your request.

Home / Price List / Contact Us

(850) 579-1208