| Price changes to take effect
January 11, 2011
CALL FOR PRICES ON COMPLETE RIFLES |
|||||||
| CLE Price List | |||||||
Barrel Work |
|||||||
Machine Barrel Blanks |
(machine, chamber, and headspace) | ||||||
Standard Contour |
$110.00 |
||||||
| Non-Standard Contour |
$160.00 |
||||||
Non-Standard Caliber's - Not .223 |
$210.00 |
||||||
$85-$125 |
|||||||
Float Barrel (Install CLE float tube) |
$165 |
||||||
Complete Rear Sight - 1/2 or 1/4 moa |
$130 |
||||||
Modify your Sights, Complete with Aperture & hood - 1/2 or 1/4 moa |
$75 |
||||||
Apertures: Sizes .036, .038, .040, .042, .046, .052 |
$7.50 |
each | |||||
Custom rear sight aperture |
$10.50 |
each | |||||
Modified Front Sight Post .052, .062, .072 |
$10.50 |
each | |||||
Custom size front sight post |
$25.50 |
each | |||||
Hood for Service Rifle Rear Sight |
Standard or Short | $15.50 |
|||||
Accurizing |
|||||||
Float bbl., Modify front and rear sight, and trigger job |
|||||||
Mil Spec |
$330 |
||||||
Colt w/ block |
$355 |
||||||
| Compass Lake Engineering Lowers | Stripped | $200.00 | |||||
| Complete | $375.00 | ||||||
| Complete w/ CLE trigger | $470.00 | ||||||
| Right Hand Bolt Release | $35.50 | $66.50 | Installed | ||||
CLE two stage Trigger Job (Mil Spec lowers) |
$95 |
||||||
Late Model Colt Trigger Job (With Block) |
$125 |
||||||
Other lowers |
$102.00 |
||||||
Trigger Kit |
$128.00 |
||||||
Large pin Trigger Kit |
$138.00 |
||||||
Front sight base |
$62.50 |
Rear base installation |
$51.00 |
||||
Rear sight base |
Aluminum or Steel | $90.00 |
Sight base for Flat top |
$70.00 |
|||
Front sight block |
(dovetail) |
$20.50 |
Gas tap |
$65.00 |
|||
Aluminum Handguard Tube |
$105.00 |
Scope Rail |
$25.50 |
||||
Flat top Scope Mount |
$90.00 |
||||||
| Barrels, Standard Contour | Any other Contour, Add $50.00 | |||
| Manufacturer/Type | Price | Rebarrel*1 | Matched Bolt *2 | Rebarrel w/ Bolt |
| Douglas Premium Air- gauged Chrome Moly | $280.00 | $330.00 | $56.00 | $386.00 |
| Douglas Premium Air- gauged Stainless | $325.00 | $375.00 | $56.00 | $431.00 |
| Krieger Stainless | $420.00 | $470.00 | $56.00 | $526.00 |
| Krieger Chrome Moly (12-16 weeks) | $420.00 | $470.00 | $56.00 | $526.00 |
| Criterion Chrome Moly - 7 twist only | $290.00 | $340.00 | $56.00 | $396.00 |
M4 Feed Ramps $5.50
Non-Standard Contours $50.00 additional
Notes:
*1) There is the labor charge for removing your old barrel and replacing it with our CLE Barrel. We can either return your old barrel or recycle it here.
*2) To have the most accurate system CLE recommends a new, minimum head spaced bolt with each new barrel. If you don't want to go to this expense, we will ensure that you old bolt meets mil. spec head space requirements.
*3) The windage adjustable front sight allows you to set your rear sight to mechanical zero and then set the front site post to match. This modification consist of machining 4 small flats on the barrel where the taper pins would normally pierce the barrel. The front sight base is also modified such that it has 4 opposing set screws instead of the taper pins. We highly recommend this system particularly for the stainless steel barrels. If you request that we don't use this system we will loctite your front base on.
*4) Please note that the above listed prices for Rebarrels are for a Compass Lake upper. Other rebarrel jobs may cost more depending on assembly.
Barrel Abbreviation Key:
KR=Krieger
SS=Stainless Steel
CM=Chrome Molly
CALL FOR PRICES ON COMPLETE RIFLES
| Service Rifles and .22's | |
| Krieger SS SR Upper 1/2 or 1/4 moa | $1,062.00 |
| Douglas SS SR Upper 1/2 or 1/4 moa | $ 975.00 |
| Douglas CM SR Upper 1/2 or 1/4 moa | $ 930.00 |
| Criterion CM SR Upper 1/2- or 1/4 moa | $ 940.00 |
| Douglas SS .22 Upper on A2 | $1,075.50 |
| Douglas SS .22 Upper on A4 with Detachable Carry Handle | $1,137.50 |
| Krieger SS .22 Upper on A2 | $1,190.00 |
| Krieger SS .22 Upper on A4 with Detachable Carry Handle | $1,252.50 |
|
(Krieger .22's are special order and have a minimum 16 week lead time) |
|
| Please add $15 to all service rifle and .22 prices for 'pre-ban'. | |
| Space Guns and Varmints | |
| Krieger SS SG Upper on modified receiver | $1,155.00 |
| Krieger SS SG Upper on A4 | $1,050.00 |
| Douglas SS SG Upper on modified receiver | $1,065.00 |
| Douglas SS SG Upper on A4 | $ 960.00 |
| Douglas CM SG Upper on modified receiver | $1,020.00 |
| Douglas CM SG Upper on A4 | $ 915.00 |
| Krieger SS Varmint Upper on modified receiver | $1,120.00 |
| Krieger SS Varmint Upper on A4 | $1,015.00 |
| Douglas SS Varmint Upper on modified receiver | $1,025.00 |
| Douglas SS Varmint Upper on A4 | $ 920.00 |
| Douglas CM Varmint Upper on modified receiver | $ 980.00 |
| Douglas CM Varmint Upper on A4 | $ 875.00 |
Barrel Abbreviation Key:
KR=Krieger
SS=Stainless Steel
CM=Chrome Molly
CALL FOR PRICES ON COMPLETE RIFLES
Please remember shipping is not included in our prices. Due to the ramped increase in shipping charges, shipping will now be determined on a per package basis.
All prices are subject to change from time to time. We try to keep them constant, but our suppliers change prices and so must we.
Home / Price List / Contact Us
(850) 579-1208