Currencies:

Shopping Cart

now in your cart 0 items


850-579-1208

Narrow Your Results:
Important Links:
Who's Online:
There currently are 66 guests online.

Information


In this section you will find helpful information that may assist you before or after your purchase.


 
Product Image Item Name- Price

 
Adjusting an Adjustable Gas Block Info Only

Adjusting an Adjustable Gas Block Info Only

Compass Lake Engineering Adjustable Gas Block The CLE Adjustable Gas Block is just like our standard Low Pro but it has been drilled and tapped to allow the gas flow to be adjusted for use with a suppressor. It is accessible from the Front so you can cover your gas block if you like with your...

It's Free!

... more info


 
Cleaning and Lubricating Info Only

Cleaning and Lubricating Info Only

CLEANING AND LUBRICATION After the barrel is broken in, clean the bore immediately each time after the rifle is fired. De-copper the bore and use JB bore cleaner every 200-300 rounds. Field strip and clean the bolt carrier assembly. Use a patch soaked with bore cleaner to clean the bolt carrier...

It's Free!

... more info


 
Compass Lake Engineering 2-Stage Trigger Info Only

Compass Lake Engineering 2-Stage Trigger Info Only

Compass Lake Engineering 2-Stage Trigger This is the "Frank White" trigger you have heard so much about. It uses mostly stock parts that are modified extensively by this legendary rifle smith. It uses a normal AR hammer, but has a modified hammer spring. These conversions will work in Colt rifles,...

It's Free!

... more info


 
Compass Lake Engineering Chamber Info Only

Compass Lake Engineering Chamber Info Only

Compass Lake Engineering Chamber The CLE match chamber is basically the same as a .223 SAAMI spec chamber with a modified lead angle in the throat. The CLE chamber has a 1.5 degree lead angle per side where the .223 is over 3 degrees. This allows for less bullet jump with out of the magazine ammo...

It's Free!

... more info


 
Compass Lake Engineering Service Rifle Float Tube Info Only

Compass Lake Engineering Service Rifle Float Tube Info Only

Compass Lake Engineering Service Rifle Tube The float tube is THE most important change you can make to your AR-15 based rifle to increase its accuracy. THE MOST IMPORTANT thing!  There are many float tubes available on the market. Some cost more than the CLE unit, and some cost less. They all...

It's Free!

... more info


 
New Barrel Break-In Info Only

New Barrel Break-In Info Only

NEW BARREL BREAK-IN PROCEDURES Your new barrel will shoot best if careful attention is given to a proper break-in. Differing opinions exist; however, we recommend that no more than 20 rounds are fired at the time before cleaning the barrel for the first 60 rounds. Your barrel must be thoroughly...

It's Free!

... more info


 
Preparing Brass Info Only

Preparing Brass Info Only

CASE PREPARATON FOR RE-LOADING TECHNIQUES FOR YOUR COMPASS LAKE ENGINEERING UPPER OR BARREL The purpose of this information is to share our technique for producing reliable and consistent brass for reloading. We want to ensure that your reloaded ammunition successfully makes it into your chamber...

It's Free!

... more info